Scissors so sharp, it's advised to keep a steady hand to use them.
*October 30: Currently on backorder. Orders received will begin shipping December 1.
Scissors so sharp, it's advised to keep a steady hand to use them.
*October 30: Currently on backorder. Orders received will begin shipping December 1.
Press-Art DTF Transfers work best with HEAT. Regardless of whether you use an iron or a professional heat press, the goal is to get the film HOT, so the glue melts and sticks to the shirt. It sticks best to fabric by applying medium/ firm pressure.
So make sure you set your press to a medium to firm pressure. Not overly hard to close, but not too light where the shirt can slip out.
Once you get the press pressure right. Next is time and temperature.
The following are the recommended settings for different type of fabrics:
Cotton:
Temperature: 320°F
Pressure: Medium to firm
Time: 15 seconds
Polyester:
Temperature: 295°F
Pressure: Medium
Time: 10-15 seconds
Cotton/Polyester Blends:
Temperature: 300°F
Pressure: Medium to firm
Time: 15-20 seconds
Nylon:
Temperature: 280°F
Pressure: Medium
Time: 10-15 seconds
Spandex/Lycra:
Temperature: 275°F
Pressure: Medium
Time: 8-12 seconds
Tri-Blends (Cotton/Polyester/Rayon):
Temperature: 300°F
Pressure: Medium
Time: 15-20 seconds
Wool:
Temperature: 280°F
Pressure: Medium
Time: 10-15 seconds
Leather:
Temperature: 275°F
Pressure: Light to medium
Time: 10-15 seconds
Once the time runs out, carefully remove the shirt from the press, laying it flat on your table before peeling.
Regardless of fabric type, you will PEEL WHEN COLD. Allow transfers to cool before you peel. We recommend peeling them at an angle, and if this is the first time using transfers, peel them a little slow to give yourself time to adjust if necessary.
IF you encounter any issue with the art not sticking to your garment. STOP PEELING, and lay your garment back onto the press and press it one more time for good measure.
Once it cools, you’re good to Peel.
If you encounter any issues with the peel, it’s more than likely that your heat press is not heating right OR you didn’t apply the right pressure. Make sure to test a samples and get your settings right. Sometimes heat press coils go out, which causes uneven heating and results in not being able to peel right.
We recommend monitoring your press for performance prior to pressing for the best experience.
Post press is optional, but is recommended. To do a post press, apply a teflon sheet to the top of your graphic and then press again for 10-15 seconds. This will permanently lock in your designs and help your prints be extra durable.
Always perform a test press: Different fabrics and even different brands of the same fabric type can react differently.
Adjust pressure as needed: Some fabrics, like spandex, may require lighter pressure to avoid deformation or scorching.
Use a heat press pillow: This can help distribute pressure evenly, especially on garments with seams, zippers, or buttons.
Check for temperature accuracy: Ensure your heat press is calibrated correctly, as temperature discrepancies can affect the transfer quality.
Never hesitate to reach out to us if you experience any problems. For additional education and information join our FREE Community
We do our best to make and ship Press-Art as fast as possible, and most orders are in transit within 24hrs (If the order is placed between Monday-Friday).
The delivery time is up to the shipping method you select, and you will be provided an estimated date of arrival based on the method you choose.
Keep in mind we cannot control how fast you will receive it once it gets handed to the carrier. If you need an order to arrive by a deadline, please leave us a note and then select the fastest shipping method available.
To ensure the fastest turnaround please make sure to provide us with production ready art. If we have issues with your art, we will attempt to reach out to you via email and message. If we do not hear from you, we will print and ship as the artwork was received.
Press-Art™ is made by processing your art and creating a base layer for it. The base layer is an adhesive which is activated with heat. The top layer is digitally printed by a huge printer.
The look and feel to Press-Art is similar to a screen print, with the stretchiness of a vinyl. It’s made to withstand the elements and bring your designs to life.
We wanted to make the ordering process as easy as possible. If this is your first time using Press-Art, we recommend you order one of our Bulk Sheets. The bulk sheets give you the freedom to test different types of images, logos, sizes and styles.
If you already know what dimensions you want, then you can order our pre-cut Press-Art. There is a small minimum to order this way, but it removes the guesswork out of cutting it yourself.
To upload your art you can use our designer tool or simply upload your art files. Checkout our How-To section for more details.
The single sheet is perfect for the designs you know you need to stock up on. For instance, say you want to order prints for your t-shirt collection, you can quickly choose the dimension and have them shipped pre-cut so you can store away and grab when needed.
But if you’re doing a one time job, maybe for a client or your sampling for a collection, then a bulk sheet works great for this. We recommend using bulk sheets when you’re ordering a lot of random designs.
The beauty of Press-Art is that all you need is something hot. This means you can start with an iron! (Don’t believe us - watch this)
To improve production and end results we highly recommend upgrading to a heat press. Any heat press that can keep consistent heat works best.
Press-Art works on pretty much any type of fabric. It has been tested on cotton, polyester, cotton/poly blends, nylon, denim, suede, hemp, hats, bags, leather, and more. The art is in the adhesive, as long as you can heat it up, it will stick!
Fabrics that are thin we recommend you adjust the amount of pressure and heat being applied. Go light pressure, slightly lower temp (290°F) and this should prevent burns/ marks to the fabric. Remember to ALWAYS do a test press on new products you try.
View our How-To section for more details.
Press-Art is EXTREMELY durable when applied correctly. If you experience issues, that means it was applied incorrectly. We have been testing Press-Art since the summer of 2022 and are approaching 50 washes on a variety of products. All of which are holding up strong! At this rate we estimate the t-shirt will go bad before the print does.
We have also been running physical stress tests on sports players such as football, baseball and track. Press-Art is coming for the win!
Don’t stress, we got you! If you have any issues ordering or after receiving your products simply send us a message or email.
Our number listed on our site is connected to whatsapp (for out of country inquiries) and if you live in the states simply give us a call. We will get back to you within 24-38hrs. Our office hours are: M-F 9AM-5PM PST
Scissors so sharp, it's advised to keep a steady hand to use them.
*October 30: Currently on backorder. Orders received will begin shipping December 1.
Share and get 15% off!
Simply share this product on one of the following social networks and you will unlock 15% off!